新闻资讯
In hydraulic cylinders, whether the selection
- Categories:Company News
- Time of issue:2021-11-15
(Summary description)Under normal circumstances, we can combine different valves according to the needs and use them together. For example, we can use the hydraulic cylinder's economically controlled share directional valve and fixed differential pressure reducing valve together
In hydraulic cylinders, whether the selection
(Summary description)Under normal circumstances, we can combine different valves according to the needs and use them together. For example, we can use the hydraulic cylinder's economically controlled share directional valve and fixed differential pressure reducing valve together
- Categories:Company News
- Time of issue:2021-11-15 16:45
- Views:
In hydraulic cylinders, whether the selection of the control valve is reasonable will have a great impact. When selecting the control valve, the first consideration is from two aspects. The first is the selection of the share directional valve, and the other is the selection of the imported pressure compensator. Let's take a look at the detailed content together.
Under normal circumstances, we can combine different valves according to the needs and use them together. For example, we can use the hydraulic cylinder's economically controlled share directional valve and fixed differential pressure reducing valve together, and then form a differential pressure compensation type share directional flow valve. The controlled flow of this flow valve mainly depends on the input electrical signal, and will not be affected by changes in fuel supply pressure and load pressure. Generally, the differential pressure of the fixed differential pressure reducing valve is 1.0 MPa.
After the pressure difference is determined, the flow rate of the hydraulic cylinder share directional valve can be determined as follows: the input signal corresponding to the maximum flow through the share directional valve should be close to 90% of the additional input signal, and the minimum flow through the share valve corresponds to The input signal should be greater than the dead zone of the share directional valve. This not only improves the resolution of the flow, but also avoids the appearance of creeping problems.
So, what should be considered when choosing an imported pressure compensator? For now, the imported pressure compensator of a hydraulic cylinder uses two-way and three-way structures in most cases, and two-way is the most common. However, it should be noted that the normal operation of this type of compensator requires a minimum control pressure difference, and the fixed differential pressure reducing valve can achieve the fixed differential pressure reducing effect.
If the fulfilling element is a negative load, then this effect will be lost. In order to avoid this problem, we can use a counterbalance valve with a back pressure effect, so as to ensure that the pressure difference of the valve port of the share valve does not change with the fluctuation of the load.
Scan the QR code to read on your phone
Relevant Information
-
In hydraulic cylinders, whether the selectionUnder normal circumstances, we can combine different valves according to the needs and use them together. For example, we can use the hydraulic cylinder's economically controlled share directional valve and fixed differential pressure reducing valve together - Design steps There is no strict sequence for the design steps 11-15
- The design steps and design requirements of the hydraulic system 11-15
- Most of the damaged parts of the hydraulic cylinder 11-15
- How to reduce the damage of hydraulic cylinders 06-15
Contact Us
+86-519-89852168
Address: No. 80, Wujin West Avenue, Wujin National High-tech Industrial Development Zone, Changzhou City, Jiangsu Province
Tel: +86 (0)519-89852168
Fax: +86 (0)519-89852168-8015
E-mail: wrjx2008@163.com
Mobile site
Copyright © 2021 Jiangsu Weirong Hydraulic & Pneumatic Technology Co., Ltd. www.300.cn Changzhou 苏ICP备2021044355号-1 IPV6
Keywords:Large hydraulic cylinder series | Hydraulic station series | Medium and large coiled parts series